“Good work, reasonable, prompt AND pleasure to work with. Highly recommended.”
Job: Outlets, GFCIs, meter box and breakers to bring an old house up to code
ML
Marc L.
Philadelphia, PA
Outlets & Receptacles
Outlet and Receptacle Replacement in Philadelphia & the Main Line
Plugs that fall out, outlets that feel warm, and two-prong outlets everywhere are small problems with real risk. We replace them with safe, grounded, tamper-resistant receptacles.
Lic. #37352
City of Philadelphia L&I
ICC Certified
Commercial Electrical Inspector
Built to the NEC
Code-compliant installs
5 Service Areas
Philadelphia & the Main Line
Know the Signs
When Should an Outlet Be Replaced?
Outlets wear out. The springs inside lose their grip, so plugs sag or slip out, and a loose contact makes heat. If an outlet feels warm, smells like burning plastic, or shows brown marks, stop using it and call an electrician. Two-prong outlets are another common issue in older homes. They have no ground path, so three-prong cords can't plug in safely, and adapters only hide the problem. Kitchens, bathrooms, laundry areas, garages and outdoor outlets also need GFCI protection under NEC 210.8, which shuts power off fast when current leaks to ground. Many older homes have none. A walk-through of your outlets often turns up a handful of these issues in one visit.
Replace an Outlet If
- Plugs fall out or feel loose
- Faceplate feels warm
- Burn marks or a burning smell
- Two-prong outlets only
- No GFCI near water
How We Do It
Doing It to Code, Not Just Swapping the Device
Replacing a receptacle looks simple, but the code adds rules once you change one. New receptacles in homes must be tamper-resistant under NEC 406.12, which uses shutters to block a child's key or hairpin. If you replace an outlet in a spot that now calls for GFCI, the new one needs GFCI protection too. Where there is no ground wire, NEC 406.4(D) allows a GFCI receptacle labeled "No Equipment Ground" as a safe replacement, or we can run a new grounded circuit. We also check for reversed polarity, loose backstab connections and overfilled boxes behind each device. We hold City of Philadelphia license #37352, and we test every outlet before we leave.
What We Check Behind Each Outlet
- Tamper-resistant devices (NEC 406.12)
- GFCI where NEC 210.8 requires it
- Ground path or GFCI option
- Polarity and loose backstabs
- Box fill and damaged wiring
Why It Pays Off
Safer Outlets for Kids, Pets and Resale
Updated outlets protect the people in your home every day. Tamper-resistant receptacles keep small fingers and stray objects out. GFCI protection near sinks, tubs and outdoor spaces can stop a shock in a fraction of a second. Grounded outlets protect computers, TVs and appliances that expect a third prong. They help when you sell too. Home inspectors test outlets with a plug-in tester and list every open ground, reversed polarity and missing GFCI they find. A buyer's agent turns that list into a request for repairs or a credit. Fixing them ahead of time costs less, and you avoid a rushed repair in the middle of closing. Electrical Hazards, Inc. can work through the whole house in one visit and hand you a list of every outlet we updated.
Where We Upgrade Most
- Kitchens and bathrooms
- Laundry rooms and garages
- Outdoor and porch outlets
- Kids' bedrooms and playrooms
- Home offices
Outlets Acting Up?
Call Electrical Hazards, Inc. at (267) 977-2106. Tell us which outlets are giving you trouble and we will check them, explain the fix, and give you a clear price before any work begins. If you have a home inspection report, send that along too.
Step by Step
How We Handle Outlet Work
01
Outlet Walk-Through
We test outlets with a tester and note loose, warm, ungrounded or reversed ones.
02
Clear Fix List
You get a list showing which outlets need replacing and why, with one price.
03
Code-Correct Install
We install tamper-resistant, GFCI or grounded receptacles wherever the code calls for each one.
04
Final Test
We retest every outlet we touched so you know each one works safely.
Why Us
Why Homeowners Call Us for Outlet Work
Small jobs still deserve full attention. Here is what you can expect.
Philadelphia Lic. #37352
ICC Certified Commercial Electrical Inspector on our team
EPA Lead-Safe Certified Firm
NAT-F164781-2 · lead-safe practices in pre-1978 homes
Look Behind the Plate
We check the wiring and box, not just the face of the outlet.
Child-Safe Devices
Every receptacle we install is tamper-resistant.
Tested Before We Leave
Each outlet gets tested for ground, polarity and GFCI trip.
No Small-Job Shortcuts
An ICC Certified Commercial Electrical Inspector on our team sets our standards.
Services
Outlet Services
From one burned outlet to a whole-house update, we handle it.
Tamper-Resistant Upgrades
Replace standard outlets with shuttered, child-safe receptacles.
GFCI Installation
Add ground-fault protection in kitchens, baths, garages and outdoors.
Two-Prong Upgrades
Ground outlets with new circuits or use labeled GFCI protection.
USB & Smart Outlets
Add USB-charging or smart receptacles where you want them.
Burned Outlet Repair
Replace damaged outlets and fix the loose wiring behind them.
Dedicated Appliance Outlets
New circuits for microwaves, freezers and window units.
Reviews
What Customers Say
“TOTALLY SATISFIED. Great price, work was completed on time and very professional.”
Job: New 220-volt line
S
Sean
Philadelphia, PA
“It's all I was looking for: great price, professional, and done right…”
Job: 220-volt line
S
Sean
Philadelphia, PA · repeat customer
Service Area
Service Area
We replace and upgrade outlets throughout Philadelphia, Lower Merion, Upper Merion, Wayne and Berwyn. Whether you need one burned outlet replaced or a whole-house update before a sale, choose your area to learn more about local service.
FAQ
Frequently Asked Questions
Why do my plugs keep falling out?
The metal contacts inside the outlet have lost their grip. A worn outlet can overheat at the loose contact, so replace it instead of ignoring it.
Can I swap a two-prong outlet for a three-prong?
Only with a ground path or GFCI protection. Code allows a labeled GFCI where no ground exists, or we can run a new grounded circuit.
What does tamper-resistant mean?
The outlet has internal shutters that open only when both prongs push in together, which blocks keys, pins and small fingers.
Where do I need GFCI outlets?
NEC 210.8 calls for them in kitchens, bathrooms, laundry areas, garages, basements, outdoors and other damp spots.
My GFCI won't reset. What now?
It may be tripping on a real fault or it may be worn out. Don't keep forcing it. We test the circuit and replace the device if it has failed.
Request a Callback
Leave your name and number, tell us a little about the job, and one of our electricians will call you back.
- (267) 977-2106
- 145 W Swedesford Rd #1123, Wayne, PA 19087
- Philadelphia Electrical Contractor Lic. #37352
- mal@electrical-hazards.com